Left arrow (top left)
This takes you back to the main menu
Share button (upper right)
This allows you to share OVRTour with others via text or email.
Down arrow (lower left above the navigation bar)
This button minimizes or raises the navigation bar. It should be minimized for full-screen viewing during either auto or manual tour mode.
Play button (lower left above the navigation bar)
This starts and stops the tour while you are in the auto-play mode.
Navigation bar (the bar with thumbs at the bottom)
This bar allows you to advance to any segment of the tour. It should be minimized for full-screen viewing during either auto or manual tour mode.
Scrub bar (at the bottom)
This allows you to swipe to advance to any part of the tour. The digital counters on either side of this bar will indicate your chronological position from both the beginning and the end of the auto-tour.
5-second fast rewind buttons (on either side of the scrub bar)
These allow you to skip forward or backward in 5-second increments.
Device-motion icon (third icon from the right above the navigation bar)
This allows you to change your orientation in each space by manually rotating your device. While in the device-motion mode you can also rotate within the space by swiping the screen with your finger. By default, our tours do not start off with device-motion engaged, but you can change this in the app’s settings.
Dollhouse icon (second to the right above the navigation bar)
This takes you to a dollhouse view of the space, where you can then tap on any part of the picture, and enter the space at any point where there are active scan positions.
Floorplan icon (the farthest icon to the right above the navigation bar)
This gives you a floorplan view of the space, where you can tap on any part of the floorplan, and enter the space at any point where there are active scan positions.
Sound off/on button.
This allows you to mute the sound while in auto-tour mode.